01
Recognise the risks
Develop awareness of workplace hazards, changing conditions and the importance of identifying risks before work begins.
Onshore Health, Safety & Environment
Onshore HSE Induction& ADNOC Life Saving RulesIndustrial Safety Awareness in Abu Dhabi
Understand essential onshore health, safety and environmental expectations, recognise workplace hazards and explore the critical safety principles behind ADNOC Life Saving Rules. Build awareness of safe work practices, site procedures and the responsibilities that help protect workers and contractors in industrial environments.
- Onshore workplace HSE awareness
- ADNOC Life Saving Rules awareness
- Hazard recognition and safe work practices
For workers and contractors seeking to understand onshore site safety expectations and critical safety principles. Confirm course suitability and site-specific requirements before booking.
Understanding the course
What Is Onshore HSE Induction Training?
Onshore HSE induction introduces workers and contractors to workplace health, safety and environmental expectations relevant to industrial operations. It helps learners understand common hazards, safe work practices and their responsibilities under applicable site procedures.
The foundation of safe work
Recognise hazards. Follow procedures. Protect people.
More than an introduction
Build an understanding of onshore safety expectations
The Onshore HSE Induction and ADNOC Life Saving Rules course introduces essential safety concepts associated with industrial workplaces. Learners explore how hazard awareness, critical safety principles and responsible behaviour contribute to safer working practices.
The aim is to help workers and contractors understand why safety controls matter, recognise when a situation may be unsafe and communicate concerns in accordance with their site procedures. Specific induction requirements depend on the employer, worksite and activities being undertaken.
Key focus: understanding workplace hazards, critical safety principles and the importance of following applicable safety procedures.
Three foundations of safety awareness
An introduction to recognising risk, understanding controls and taking personal responsibility at work.
02
Understand safe work
Explore why applicable site procedures, risk controls, work authorisations and protective measures matter.
03
Make safer decisions
Understand the importance of following safety instructions, communicating concerns and responding appropriately to unsafe conditions.
Critical safety principles
ADNOC Life Saving RulesUnderstand the risks. Protect every life.
The ADNOC Life Saving Rules address critical risks associated with high-risk workplace activities. Understanding the hazards behind these principles helps workers recognise unsafe situations and follow the controls applicable to their tasks.
Life-saving awareness for onshore work
Ten critical safety themes
Explore the hazards, responsibilities and practical precautions associated with these essential safety topics.
Onshore HSE · Rule awareness
01
WORK AUTHORISATION
Work with a valid permit
Understand when a permit to work is required. Confirm that the necessary authorisation, risk controls and precautions are in place before the activity begins.
Practical application
Check the applicable permit and understand its conditions before starting work.
02
CONFINED SPACES
Obtain authorisation before confined-space entry
Confined-space entry can expose workers to hazardous atmospheres, restricted access and other serious risks. Follow the required entry authorisation and precautions.
Practical application
Confirm entry requirements, atmospheric testing and emergency arrangements as applicable.
03
ENERGY ISOLATION
Verify isolation and zero energy
Equipment may contain electrical, mechanical, hydraulic, pneumatic or other stored energy. Required isolation must be established and verified before work proceeds.
Practical application
Follow the approved isolation procedure and verify the required safe condition.
04
SAFETY SYSTEMS
Obtain authorisation before overriding safety controls
Safety-critical controls and protective systems help prevent dangerous events. Bypassing or disabling them without appropriate authorisation can increase risk.
Practical application
Follow the formal approval process before any permitted override or impairment.
05
FALL PREVENTION
Protect yourself when working at height
Falls from elevated locations can cause severe or fatal injuries. Use the required fall-prevention or fall-protection measures and approved access arrangements.
Practical application
Check the work area, access equipment and required fall-protection controls.
06
LIFTING OPERATIONS
Plan lifting operations and control the area
Lifting activities can expose workers to suspended loads, moving equipment and dropped objects. Appropriate planning and control of the lifting area are essential.
Practical application
Follow the lifting plan and remain outside restricted or hazardous areas.
07
TOXIC GAS
Follow toxic gas safety requirements
Toxic gas environments can present serious exposure risks. Workers must follow applicable entry requirements, monitoring arrangements, protective measures and emergency procedures.
Practical application
Understand the gas hazards and follow the controls required for the task.
08
ROAD SAFETY
Follow safe driving rules
Driving incidents can endanger vehicle occupants, pedestrians and other road users. Follow applicable traffic rules, site speed limits and vehicle safety requirements.
Practical application
Drive attentively, obey site traffic controls and avoid distractions.
09
LINE OF FIRE
Keep yourself and others out of the line of fire
Moving equipment, suspended loads, pressurised systems and stored energy can create dangerous exposure zones. Recognise these hazards and maintain safe positioning.
Practical application
Identify potential movement and release paths before positioning yourself.
10
FIRE PREVENTION
Control flammables and ignition sources
Flammable materials and uncontrolled ignition sources can cause fires or explosions. Follow the applicable requirements for material handling, ignition control and hazardous activities.
Practical application
Identify fire hazards and confirm the required precautions before work begins.
A rule is effective only when its controls are followed
Workers should understand the risks behind each safety principle, follow the applicable site procedures and raise concerns when conditions are unsafe. This overview is educational and does not replace official ADNOC material or site-specific requirements.
The descriptions are explanatory summaries. Verify the exact current ADNOC Life Saving Rules wording against the official materials used by FIHS before publication.
Industrial hazard awareness
Understanding HSE Hazards in Onshore Work Environments
Effective onshore HSE induction starts with recognising the hazards associated with industrial work. Explore common hazard categories, real-world examples and the precautions workers should understand before undertaking a task.
Identify · Assess · Control
Recognise the hazard before exposure occurs
Understand how workplace conditions, equipment and activities can create risks for you and the people around you.
Explore hazard categories
Select a category to explore examples and general control measures.
Selected hazard · 01
Slips, trips, falls and falling objects
Uneven surfaces, obstructed walkways, elevated work and falling objects can expose workers to injury. Conditions can change throughout a shift, so access routes and work areas need continuous attention.
Examples to recognise
- Slippery floors and poor housekeeping
- Unprotected edges and unsafe access
- Falling tools or materials
General control measures
- Keep access routes and walkways clear.
- Use approved access equipment and required fall protection.
- Respect barricades and overhead-work exclusion zones.
These examples are general safety-awareness guidance. Actual controls must be determined by the relevant risk assessment, applicable procedures, equipment requirements and site rules.
Safe work practices
Make safety part of every task.
Safe work starts before anyone picks up a tool. A structured approach helps workers recognise hazards, verify precautions, communicate clearly, and respond when conditions change.
Verify before you proceed
Never assume a safety control is in place. Check it, understand it, and raise concerns when something is wrong.
Remember: If a task becomes unsafe, stop the work, move away from immediate danger where necessary, and notify the appropriate supervisor.
A practical sequence
From preparation to safe execution
STEP 01Before work
Plan the task
Understand the job scope, identify hazards, review the applicable risk assessment, and confirm the required controls before work begins.
STEP 02Authorisation
Confirm authorisation
Check whether a permit to work or other formal authorisation is required. Confirm the work conditions, responsibilities, and precautions with the relevant personnel.
STEP 03Site readiness
Inspect the work area
Check tools, equipment, access routes, barriers, and the surrounding work environment. Report unsafe conditions and correct them before proceeding.
STEP 04Risk control
Verify safety controls
Confirm that required isolations, gas testing, personal protective equipment, lifting controls, and other task-specific precautions are in place where applicable.
STEP 05During work
Work safely and reassess
Follow the approved work method, maintain communication, and remain alert to changing conditions. Stop work and seek guidance if controls are missing or the situation becomes unsafe.
Safety is an ongoing responsibility
Reassess when the work scope, people, equipment, or conditions change.
Build safer work habits
Understand the hazards. Follow the controls.
Explore HSE induction training with FIHS and learn how hazard awareness and safe work practices support safer onshore operations.
Emergency preparedness
When an incident occurs, your response matters.
Onshore HSE awareness includes knowing how to recognise an emergency, raise the alarm, protect people, and follow the established site response arrangements.
Know your alarm procedure
Follow the specific arrangements for your worksite.
Response protocol
Five essential actions
01
Recognise the emergency
Identify warning signs such as fire, smoke, a gas release, an injury, or an uncontrolled hazardous situation.
02
Raise the alarm
Activate the site emergency alert or follow the established reporting procedure. Communicate the location and nature of the incident when safe to do so.
03
Protect people
Stop work, warn nearby personnel, and move away from immediate danger. Do not enter a hazardous area or attempt a rescue without appropriate training and authorisation.
04
Follow site instructions
Follow the emergency response plan, instructions from authorised responders, and designated evacuation routes. Proceed to the assigned assembly point when instructed.
05
Report and account
Provide relevant information to emergency personnel and follow site arrangements for personnel accountability. Do not re-enter the affected area until authorised.
Be ready before it happens
Prepared people respond more effectively.
Listen and communicate
Follow instructions from authorised responders.
Know where to go
Understand site evacuation routes and assembly points.
Response priorities
People first
Protect yourself and others from immediate danger.
Clear communication
Use the designated alarm, radio, or reporting channel.
Follow the plan
Use established emergency procedures and instructions.
Every site has its own emergency arrangements
Always follow the current site emergency response plan, designated alarm signals, reporting channels, and instructions from authorised personnel.
Course curriculum
Explore the key topics in Onshore HSE Induction.
Explore the main subject areas that support workplace safety awareness, Life Saving Rules understanding, hazard recognition, safe work practices, and emergency preparedness.
Learning modules
Select a topic to explore
Learning focus
Build hazard awareness, understand safety responsibilities, and recognise when to follow site procedures or seek guidance.
Module 0101
Health, safety and environmental awareness
Understand why workplace health, safety, and environmental protection matter in onshore operations.
Topics to explore
- Roles and responsibilities in the workplace
- Recognising unsafe acts and unsafe conditions
- Following applicable site rules and procedures
- Understanding individual safety responsibilities
1 of 6
Supporting awareness
Additional workplace safety topics
Related subjects may be addressed according to the applicable course scope, workplace risks, and training requirements.
07
Occupational health
Awareness of workplace exposure, personal hygiene, and health-related precautions.
08
PPE awareness
Understanding the purpose, correct use, and limitations of personal protective equipment.
09
Environmental awareness
Recognising the importance of spill prevention, waste control, and environmental protection.
Course information
Need the applicable training details?
Contact FIHS to confirm the current course scope, delivery arrangements, and applicable training requirements.
Note: This curriculum overview describes general HSE awareness topics. It is not a substitute for the current approved course syllabus or site-specific procedures. Confirm the actual course content with FIHS before publication or enrolment.
Who should consider this training?
HSE awareness for people working in onshore environments.
Onshore HSE induction training helps people understand workplace safety expectations, recognise hazards, and become familiar with relevant safety procedures. The appropriate training depends on the workplace, role, and requirements of the requesting organisation.
Role and site requirements matter
General HSE awareness does not automatically replace a client-specific induction, competency assessment, permit authorisation, or any other required qualification.
Explore potential audiences
Potential audience01 / 04
New employees and contractors
People preparing to enter an onshore workplace who need to understand the relevant HSE expectations, site rules, and individual responsibilities.
Relevant areas of awareness
- Understand workplace safety responsibilities.
- Recognise common hazards and unsafe conditions.
- Learn how to raise concerns and follow site procedures.
Before attending
Confirm the current course arrangements and any organisation-specific requirements before making plans.
Check the applicable course requirements with FIHS or the requesting organisation.
The appropriate audience, prerequisites, duration, and delivery arrangements must be confirmed against the current course requirements.
Abu Dhabi, UAE
Workplace safety awareness
Safer decisions begin with understanding the risks.
Build awareness of hazards, safe working practices, and emergency responsibilities relevant to onshore environments.
Training in Abu Dhabi
Onshore HSE Induction Training in Abu Dhabi, UAE
Understanding workplace health and safety is important for personnel working in industrial, construction, energy, and other onshore environments. Onshore HSE induction training introduces essential safety responsibilities, hazard awareness, safe work practices, and emergency preparedness.
For organisations and personnel seeking Onshore HSE Induction Training in Abu Dhabi, the appropriate course scope should be confirmed against the applicable workplace, client, and training requirements. Where ADNOC Life Saving Rules apply, learners should understand the current requirements and follow the relevant site procedures.
01
Workplace hazard awareness
Recognise common onshore workplace hazards and understand why appropriate precautions matter.
02
Safety rules and responsibilities
Build awareness of site safety requirements, individual responsibilities, and applicable Life Saving Rules.
03
Emergency preparedness
Understand the importance of alarm procedures, emergency instructions, evacuation arrangements, and incident reporting.
Course availability, delivery arrangements, duration, certification, and any approval status should be confirmed directly with FIHS before enrolment.
Why HSE induction matters
Understand the workplace before beginning the work.
Recognise hazards
Learn to identify unsafe conditions and understand the importance of appropriate preventive measures.
Follow site procedures
Understand the importance of applicable safety rules, communication arrangements, and emergency instructions.
Frequently asked questions
Questions about Onshore HSE Induction?
Find answers to common questions about HSE induction, ADNOC Life Saving Rules awareness, course suitability, and training arrangements in Abu Dhabi.
Need course-specific information?
Confirm the current syllabus, duration, availability, and applicable certification arrangements directly with FIHS.
Have a question not covered here?
Your questions, answered
Select a question to read the answer.
Onshore HSE Induction Training introduces workplace health, safety, and environmental expectations relevant to onshore work environments. Topics may include hazard awareness, safe work practices, individual responsibilities, applicable Life Saving Rules, and emergency procedures. The actual scope should be confirmed against the applicable course syllabus.
Still have questions?
Ask FIHS about the course scope and current arrangements.